18V 9 Piece Power Tool Kit with 3 x 5.0Ah Battery & Charger T4TKIT-16454

18V 9 Piece Power Tool Kit with 3 x 5.0Ah Battery & Charger T4TKIT-16454

Kit Content:

DTD152Z Impact Driver
DHP482Z Combi Drill
DGA452Z Angle Grinder
DJR185Z Reciprocating Saw
DSS611Z Circular Saw
DJV180Z Jigsaw
DTM51Z Oscillating Multi-Cutter
DHR202Z SDS + Rotary Hammer
DML815 Torch
3 x 5.0Ah BL1850 Batteries
2 x DC18RC Charger
4 x 821551-8 Type 3 Makpac Case No Inlay

Features:

DTD152Z Impact Driver:

Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
One touch bit installation
Ergonomic soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
All metal gears

DHP482Z Combi Drill:

Electric brake
Mechanical 2-speed control
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
Ergonomic soft grip handle
Compact overall length of 198mm
Single sleeve keyless chuck
Lightweight design
Battery protection circuit
All metal gears

DGA452Z Angle Grinder:

Electric brake
Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip

DJR185Z Reciprocating Saw:

Single LED job light with pre-glow function
Shoe Adjustment
Will accept both reciprocating saw blades and jigsaw blades
Two switch levers with variable speed control; Trigger switch on tool handle & Paddle switch on tool body to make operation easier at any grip position for versatile applications by using either trigger
Rubberized soft grip provides comfortable and sure grip

DSS611Z Circular Saw:

Lightweight and compact
Rigid aluminium base provides high quality and toughness
Double safety trigger will prevent accidental starting, is easy to operate even with gloved hands and can be operated from both sides of the handle
Bevel cuts up to 50 degrees
Smooth and powerful cutting at the high rotational speed of 3,700 rpm delivered from enhanced motor
Rubberised soft grip which provides comfortable handling and more control but also minimises hand strain
Safety cover with calibration line for adjusting depth
Removable dust nozzle allows a vacuum cleaner to be connected
Hex wrench is storable on board the saw

DJV180Z Jigsaw:

Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on
3 orbital settings + straight cut
Blower will clear the pencil line of dust
Lightweight and compact
Tool-less blade change – push in lock system enables very fast blade changes
LED light will illuminate your cut line
Smooth and powerful cutting at the high stroke speed at 2,600 spm
Double insulated
Soft start

DTM51Z Oscillating Multi-Cutter:

Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories,.
Ergonomically best possible barrel grip, with a perfect circumference size and shape whcih fits the hand for extra comfortable handling.
Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.)
Accessories can be installed at 30º increments, across 360º
Variable speed control dial.
Soft start
Anti-restart function.
High operating efficiency.

DHR202Z SDS + Rotary Hammer:

3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
More compact design at only 330mm long and weighs only 3.2 kg for less operator fatigue
One touch sliding chuck – for easy bit changes
Ergonomic shape fits like a glove with even pressure and easy control – rubberised handle has anti slip dimples
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light with afterglow function – illuminates job in poor lighting conditions
Rotary hammer action
Rotary only action
Variable speed trigger

DML815 Torch:

12 pivoting positions with 0 to 170º swivel range
4 LED bulb for maximum illumination
Lightweight and compact for work in tight spaces
Accessory strap enables tool suspension for hands-free work
54 hours of continuous run-time

Comes with:

3 x 5.0Ah BL1850 Batteries
2 x DC18RC Charger
4 x 821551-8 Type 3 Makpac Case No Inlay

Product Specification: